| Automatic AC breakdown-voltage tester | Automated breakdown-voltage testing of insulating liquids using a selected test method. | Typically provides controlled AC voltage ramping, breakdown detection, and a sequence of repeated tests. Voltage range and ramp settings depend on the instrument and method. | Check that the instrument supports the exact electrode geometry, electrode gap, voltage rise rate, and test sequence required by the chosen method. |
| IEC 60156:2018 | Determination of breakdown voltage at power frequency for insulating liquids. | Specifies a test method using a test cell and electrodes, including the procedure for applying voltage and reporting results. | Use an instrument and cell configured for the IEC method. Follow the standard for sample handling, test conditions, and reporting. |
| ASTM D1816 | Breakdown voltage of insulating liquids using VDE electrodes. | Uses a VDE electrode configuration and a defined test procedure. The applicable electrode spacing and procedural details are specified by the method. | Select a tester with a compatible VDE test cell. Do not compare results from different electrode arrangements as if they were directly interchangeable. |
| ASTM D877/D877M | Breakdown voltage of insulating liquids using disk electrodes. | Defines a disk-electrode test method and its associated procedure. | Verify that the tester is set up for the specified disk electrodes and method. Use the edition required by the governing specification or contract. |
| IEEE C57.106 | Guidance on acceptance and maintenance of insulating oil in electrical equipment. | Provides guidance for evaluating oil condition; it is not itself a breakdown-voltage tester test-cell method. | Use alongside the selected laboratory test method and applicable equipment requirements when interpreting results. |
| IEC 60422 | Supervision and maintenance guidance for mineral insulating oils in electrical equipment. | Addresses oil monitoring and evaluation in service, including consideration of test results as part of condition assessment. | Apply the relevant guidance for the equipment and oil category; dielectric breakdown voltage is only one element of oil assessment. |
| Portable field tester | On-site breakdown-voltage testing where portability and rapid screening are important. | Often combines a compact test cell, safety interlocks, a display, and battery or mains operation; functions vary by model. | Assess transport protection, power options, environmental operating limits, and the ability to meet the required laboratory method. |
| Laboratory-grade tester with data export | Routine laboratory testing with documented test sequences and result records. | May offer programmable sequences, stored results, and data export. These are product features, not substitutes for method compliance. | Check calibration traceability, record format, software support, and the manufacturer’s documented measurement specifications. |