| Momentary, center-off rocker | Moves the winch in either direction while pressed; returns to the center-off position when released. | Often a spring-return, double-pole, double-throw (DPDT) switch used with a suitable reversing control circuit. | Handheld or dashboard control for winch-in and winch-out commands. | Confirm the contact diagram, momentary action, terminal layout, and compatibility with the winch’s control system. |
| Maintained on-off-on rocker | Stays in the selected position until manually moved back to off or the opposite position. | May use a DPDT arrangement for reversing a control signal; exact wiring depends on the winch circuit. | Applications specifically designed for a latching control input. | Check whether the winch requires spring-return control. A maintained switch can leave a command active if the circuit does not provide a separate stop function. |
| Illuminated rocker | Uses a lamp or LED to show switch status or provide panel illumination; the switching action may be momentary or maintained. | Switch contacts plus separate or integrated illumination terminals, depending on the design. | Dashboards and control panels where visibility in low light is useful. | Check lamp voltage, polarity for LED versions, illumination wiring, and whether the light indicates power or switch position. |
| Sealed or weather-resistant rocker | Provides a protective design intended to limit ingress of dust or moisture; available in different switching actions. | Contact arrangement varies; sealing is a construction feature rather than a specific circuit type. | Exposed vehicle panels or equipment used in wet, dusty, or muddy conditions. | Look for a stated ingress-protection rating and confirm that the installed panel, terminals, and wiring are protected as required. |
| Guarded rocker | A cover or raised guard helps reduce accidental operation; the rocker itself may be momentary or maintained. | Circuit arrangement depends on the switch model and winch control design. | Control locations where incidental contact is a concern. | Check that the guard allows deliberate operation and does not obstruct access during intended use. |
| Panel-mount rocker | Installs through a panel opening and is retained by clips, a bezel, or mounting hardware. | Available with different pole, throw, and return configurations, including momentary and maintained versions. | Fixed dashboards, switch panels, and equipment consoles. | Verify cutout dimensions, panel thickness limits, terminal clearance, and mounting orientation. |