| System compatibility | Grid type, phase configuration, nominal voltage, and frequency | Match the unit to the local utility supply and the system design; common grid frequencies include 50 Hz and 60 Hz. | A mismatch can prevent connection or cause the system to operate outside permitted limits. |
| PV input range | Maximum DC voltage, MPPT operating range, and maximum input current | Check these against the solar array’s calculated cold-weather open-circuit voltage and operating current. | The array must stay within the controller or inverter’s electrical limits in expected conditions. |
| MPPT capability | Number of independent maximum power point trackers and string allocation options | Separate trackers can help when roof planes have different orientations or shading conditions. | Appropriate tracking can reduce the impact of mismatched array conditions on energy harvest. |
| Rated AC power | Continuous output rating, peak output limits, and permitted DC-to-AC sizing | Size for the array, expected production, utility rules, and the project’s export limit rather than choosing by rating alone. | An unsuitable rating can limit output or add cost without improving usable energy. |
| Conversion efficiency | Peak efficiency and, where available, weighted or regional efficiency figures | Compare figures measured using the same test method; actual performance also depends on load, temperature, and installation. | Peak efficiency alone may not represent energy conversion across everyday operating conditions. |
| Grid-code compliance | Required local certifications, voltage and frequency response, and utility approval requirements | Verify the current requirements with the utility or a qualified installer before purchase; rules vary by location. | A compliant, approved unit is necessary for lawful grid interconnection in many jurisdictions. |
| Anti-islanding protection | Documented grid-loss detection and automatic disconnection behavior | Confirm that protection is included and certified for the intended grid connection. | It helps prevent a grid-connected system from energizing a section of the grid during an outage. |
| Export control | Configurable export limits, meter or sensor compatibility, and response behavior | Check whether the local connection agreement permits export and what equipment is required to enforce a limit. | Some sites have export caps or are not permitted to send surplus energy to the grid. |
| Monitoring and communications | Local display or app, data logging, communication options, and fault notifications | Check whether monitoring needs an internet connection and whether data can be accessed locally. | Useful monitoring makes it easier to identify outages, faults, and unexpected production changes. |
| Battery and backup needs | Whether storage is supported and whether backup requires additional equipment or a different system design | A standard grid-tied system generally shuts down during a grid outage unless it is specifically designed for backup operation. | Battery compatibility alone does not guarantee that loads can be powered during an outage. |
| Environmental rating and cooling | Permitted installation location, ingress protection, operating temperature, and ventilation requirements | Use an outdoor-rated unit only where its documented rating and installation instructions allow it. | Heat, moisture, dust, and inadequate clearance can affect reliability and performance. |
| Warranty and serviceability | Warranty term, exclusions, replacement process, and availability of qualified local service | Compare written warranty conditions and service arrangements, not just the stated duration. | Support access and repair logistics can affect downtime and long-term ownership costs. |