| Semi-automatic turntable pallet stretch wrapper | Regular pallet loads in warehouses and smaller production operations; an operator places and removes each pallet. | Approximately 10–30 pallets per hour, depending on load size, wrap pattern, and operator cycle time. | Stretch film, commonly supplied on rolls. | Requires a level, load-bearing floor and suitable clearance for pallet movement. Confirm turntable diameter and maximum load capacity against actual pallets. | Check film carriage rollers, turntable bearings, and safety devices regularly. Confirm local voltage and frequency, spare-parts availability, and access to remote or in-person service. |
| Automatic rotary-arm pallet stretch wrapper | Higher-volume palletizing lines and loads that may be unstable on a rotating turntable. | Approximately 20–60 pallets per hour; actual output depends on conveyor layout, load dimensions, and wrap settings. | Stretch film. | Needs a defined infeed and outfeed layout, floor space for the rotating arm, and integration with upstream or downstream conveyors. Verify guarding and access requirements at the destination site. | Inspect arm drive components, film delivery system, sensors, and guards. For international projects, clarify commissioning scope, operator training, documentation language, and local electrical and safety requirements. |
| Horizontal orbital stretch wrapper | Long or irregular products such as profiles, boards, pipes, and assembled items that are fed through a wrapping ring. | Approximately 5–30 units per minute, with substantial variation by product length, diameter, and handling method. | Stretch film; some configurations can apply protective layers or additional materials. | Confirm the ring opening, product support, conveyor height, and available infeed and outfeed space. Long products may require extra support and careful alignment. | Keep film-contact surfaces clean and inspect rollers, ring drive components, and cutting or film-clamping mechanisms. Confirm that the machine accommodates the full range of product sizes and film specifications. |
| Horizontal flow wrapper | Individually packaged food, consumer goods, and other products with consistent shapes and dimensions. | Approximately 30–200 packs per minute, depending on product, film, pack length, and machine configuration. | Heat-sealable roll film, selected for the product and required package properties. | Requires accurate product feeding and alignment. Check electrical supply, compressed-air needs if applicable, floor conditions, and access for film-roll changes and cleaning. | Regularly clean sealing surfaces and inspect sealing jaws, belts, sensors, and product-feeding parts. Validate film availability and compatibility in the destination market before purchase. |
| Shrink bundler with heat-shrink tunnel | Multipacks, trays, and grouped products that need a close-fitting film bundle for handling or display. | Approximately 5–25 bundles per minute, depending on bundle size, film, and tunnel configuration. | Heat-shrink film selected for the product and required bundle strength. | Allow space for the tunnel, safe operator access, and suitable ventilation. Confirm the site can support the machine’s electrical load and heat output. | Clean the tunnel and inspect heaters, conveyors, temperature controls, and guarding. Confirm local electrical compatibility and ensure replacement heating elements and other wear parts can be sourced. |
| Automatic stretch hooding machine | High-throughput pallet loads requiring a hood that covers the top and sides; common in automated end-of-line systems. | Approximately 40–120 pallets per hour for suitable configurations; speed depends on pallet size, hood format, and line integration. | Stretchable hood film supplied in machine-compatible formats. | Requires adequate overhead clearance, a stable pallet transfer system, and coordinated line controls. Check the machine’s operating range against pallet dimensions and site layout. | Inspect film handling, cutting and clamping mechanisms, sensors, and safety systems. Plan for specialist commissioning, operator training, and a reliable supply of compatible film. |
| Coil and reel wrapping machine | Steel, wire, cable, paper, and other coils or reels that require protective wrapping for storage or transport. | Approximately 5–20 loads per hour, depending on coil dimensions, weight, loading method, and wrap requirements. | Stretch film or other specified protective wrapping materials, depending on the machine and application. | Verify maximum coil weight and dimensions, lifting equipment, load support, and operator access. Floor loading and safe handling arrangements are especially important for heavy coils. | Inspect rotating supports, clamps, film delivery components, and load restraints. Provide the supplier with representative product samples and confirm local service capability and availability of wear parts. |