| 1 | Raw-material and feedstock supply | Supplies tantalum-bearing materials or processed feedstock to downstream metal producers. | Tantalum concentrates, intermediate materials, and recycled tantalum-bearing scrap. | Material identity, impurity control, traceability, and consistency of feedstock. |
| 2 | Extraction and chemical refining | Converts suitable feedstock into purified tantalum compounds for subsequent metal production. | Hydrometallurgical separation, purification, and preparation of tantalum compounds. | Chemical purity and control of metallic and non-metallic impurities. |
| 3 | Tantalum powder production | Produces tantalum powder, an important intermediate in the wider tantalum materials supply chain. | Powder preparation and processing; powder is a distinct product from sheet. | Powder chemistry and particle characteristics are relevant to powder applications, but do not by themselves establish sheet quality. |
| 4 | Metal consolidation and ingot production | Consolidates tantalum metal feedstock into forms that can be worked into wrought products. | Powder or other suitable metal feedstock; consolidation and melting routes depend on the producer and product requirements. | Ingot integrity, composition, and suitability for downstream forming. |
| 5 | Primary rolling and sheet formation | Reduces tantalum stock through rolling operations to produce plate, strip, or sheet in specified dimensions. | Hot or cold working may be used as appropriate to the material and production route. | Thickness, width, flatness, surface condition, and dimensional tolerances. |
| 6 | Intermediate annealing and heat treatment | Uses controlled heat treatment between forming stages or as a final operation when required. | Annealing schedules are selected according to the material condition and intended properties. | Mechanical condition, grain structure, and consistency across the sheet. |
| 7 | Cutting and surface finishing | Finishes sheet to customer dimensions and prepares edges and surfaces for handling or fabrication. | Slitting, shearing, machining, cleaning, and other specified finishing operations. | Cut-edge quality, surface cleanliness, finish, and protection from contamination or damage. |
| 8 | Inspection and material testing | Checks product characteristics against the purchase specification and applicable material requirements. | Dimensional inspection, chemical analysis, surface examination, and mechanical testing where specified. | Test methods, sampling, acceptance criteria, and inspection records should be agreed between buyer and supplier. |
| 9 | Custom conversion and fabrication | Provides cut-to-size or further-processed sheet for customers with defined component requirements. | Blanking, machining, forming, or other conversion work, subject to the requested design and material condition. | Drawing revision, tolerances, handling requirements, and confirmation that the material condition suits the intended fabrication. |
| 10 | Packaging, documentation, and distribution | Prepares finished sheet for shipment and supplies the associated order and material documentation. | Protective packaging, product identification, packing records, and shipment coordination. | Part and lot identification, quantity, agreed certificates or test reports, and packaging suitable for the shipping route. |