| Loaded pallet weight | 1,500 lb per pallet, including the pallet and product | Use the heaviest expected operating load, not the average. Account for packaging, containers, and load variation. | Confirm the weight from actual inventory or shipping records. Keep loads within the rack system’s rated limits. |
| Load per beam level | Two pallets per level × 1,500 lb = 3,000 lb per beam pair | Check the beam-pair rating for the actual beam span and loading arrangement. The rating generally assumes the load is distributed as specified by the rack supplier. | Do not treat a beam rating as an upright-frame rating; both components must be suitable for the planned configuration. |
| Number of loaded beam levels | Three loaded beam levels above the floor | The upright frame must be checked for the cumulative loads delivered through the connected beams, along with the frame’s height and bracing layout. | Have the complete frame configuration checked against its rated capacity; do not select an upright based on height or steel thickness alone. |
| Pallet and beam dimensions | Example pallet: 48 × 40 in; beam span selected to suit the pallet layout and required clearances | Verify beam length, frame depth, pallet overhang, load support, and clearance for the handling equipment. | Measure the actual pallets and loads. Confirm the rack layout allows safe placement and retrieval without unintended contact with the uprights. |
| Storage height and frame configuration | Four storage elevations, with the top beam positioned to suit the building and handling equipment | Check overall frame height, beam elevations, aisle equipment reach, ceiling obstructions, and the exact bracing and connector arrangement. | Use the capacity rating for the specific upright height and configuration. A taller or differently braced frame may have a different rating. |
| Load distribution and condition | Pallets placed evenly on the intended support points; no unapproved concentrated or cantilevered loads | Check whether loads are uniform, centered, and supported as required. Inspect uprights for damage, corrosion, and unauthorized alterations. | Follow the rack supplier’s loading and inspection guidance. Arrange prompt assessment of damaged components before continued use. |
| Floor and anchorage | Rack installed on a verified floor slab, with base plates and anchors specified for the design | Confirm floor condition, slab suitability, base-plate details, anchorage, and any applicable seismic or local design requirements. | Coordinate rack design and installation requirements with a qualified rack designer or engineer familiar with local codes. |