| Radiation source and work task | Identify the imaging procedure, radiation source, typical working position, exposure direction, and whether the work is routine or occasional. | Can the supplier help match eyewear options to the actual procedure and explain the limits of the product’s protection? | Document the intended use with the facility’s radiation safety officer or medical physics team. Eyewear is supplemental protection and does not replace shielding, distance, or safe work practices. |
| Lead equivalence | Specify the required lead-equivalent thickness for the lenses and, where applicable, the side shields. The required value should be set for the workplace and procedure. | Does the supplier state the lead equivalence in millimetres of lead (mm Pb) and identify the test conditions or standard used to determine it? | Request product-specific test documentation. Lead equivalence depends on the X-ray beam quality and test method; values should not be compared without checking their stated conditions. |
| Applicable standards and regulations | Confirm the standards and regulatory requirements applicable in the country or region where the eyewear will be used. | Can the supplier provide a declaration or technical file identifying the relevant standard and the model it covers? | IEC 61331-3:2014 covers protective clothing, eyewear, and protective patient shields against diagnostic medical X-radiation. Confirm applicable editions and local requirements with the responsible radiation-protection specialist. |
| Lens coverage and side protection | Decide whether the work requires front-only coverage, wraparound coverage, or side shields, based on the exposure geometry and workplace assessment. | Are lens dimensions, side-shield options, and coverage information available for the specific frame configuration? | Compare the documented coverage with likely exposure directions. A frame’s appearance alone does not establish its radiation-protection performance. |
| Prescription and fit | Define whether prescription lenses, prescription inserts, or non-prescription eyewear are needed. Include fit requirements for different users. | Can the supplier provide the selected protective configuration with the required vision correction and fitting options? | Arrange a fit check with intended users. Confirm that the glasses remain stable, do not obstruct the field of view, and can be worn with any required personal protective equipment. |
| Weight and comfort | Estimate typical wear duration and identify comfort concerns, such as pressure on the nose or behind the ears. | Are product weight, frame dimensions, and available sizes documented? Can users evaluate a sample before a larger purchase? | Assess comfort during a representative work period. Heavier lenses may affect comfort, so balance fit and coverage with the protection specified for the task. |
| Optical quality | Specify the visual tasks that must remain clear, including close work, monitor viewing, and any required prescription correction. | Can the supplier provide information about lens clarity, optical distortion, coatings, and prescription compatibility? | Have users inspect vision and fit under normal workplace conditions. Confirm that any coating or customization applies to the selected protective model. |
| Product identification and traceability | Require clear identification of the model and its protection specification for purchasing, inspection, and replacement. | Are model identifiers and lead-equivalence information available on product labels, documentation, or both? | Keep the product documentation with purchasing and inventory records so the eyewear can be checked against the approved specification. |
| Quality documentation | Define what records are needed for internal approval and ongoing procurement. | Can the supplier provide technical specifications, test reports, instructions for use, and information on manufacturing quality controls? | Review product-specific evidence. An ISO 9001 certificate relates to a quality-management system; by itself, it does not prove the radiation-protection performance of a particular eyewear model. |
| Inspection, care, and replacement | Set a workplace process for cleaning, storage, inspection, and removal from service if eyewear is damaged. | Are care instructions and guidance on checking lenses and frames supplied? Can replacement parts or equivalent replacement models be identified? | Follow the manufacturer’s instructions and the facility’s radiation-protection program. Do not use eyewear with damage that could affect vision, fit, or protective coverage. |
| Supply and service capability | Set expected quantities, delivery timing, prescription-order needs, and the level of support required. | Can the supplier confirm lead times, ordering details, after-sales support, and how specification changes will be communicated? | Compare documented service commitments and the ability to supply the approved specification consistently; do not select on price alone. |
| Final approval | Record the approved model, intended users, protection specification, and responsible reviewer before purchase. | Will the supplier provide a final quotation and product documents that match the approved requirements? | Obtain approval from the appropriate workplace decision-makers, such as procurement and the radiation safety officer or medical physics team. |
| Important: There is no single lead-equivalence value or eyewear configuration that is suitable for every procedure or workplace. Set protection and fit requirements through a task-specific radiation-protection assessment and verify them against product-specific documentation. |