| 1. Fabric quality | Inspect a sample knitted on the proposed machine for holes, dropped stitches, barre, oil marks, and uneven appearance. | Assess the fabric after relaxation and, where relevant, after the planned finishing process. Compare samples made with the same yarn and settings. | A running trial, fabric swatches, inspection results, and recorded stitch-length and take-down settings. |
| 2. Yarn compatibility | Confirm the intended fiber, yarn count, yarn structure, package format, and yarn feed arrangement are suitable for the machine and gauge. | There is no universal yarn-count range for every gauge. Check the machine’s knitting recommendations and run the actual production yarn before purchase. | A yarn-and-gauge compatibility chart, a sample run using your yarn, and confirmation of the required creel and feeders. |
| 3. Gauge and diameter | Match needle gauge and cylinder diameter to the required fabric structure, width, and product range. | Circular knitting machines are available in different gauges and diameters; confirm the exact configuration rather than relying on a general model description. | A written machine specification listing gauge, diameter, needle count, and compatible fabric applications. |
| 4. Stitch settings and fabric weight | Check whether stitch length and yarn feed can be adjusted and repeated consistently. | Fabric weight depends on factors including yarn, stitch length, machine settings, and finishing. Specify a target GSM and test it using an agreed sampling method. | Trial-fabric GSM results, measurement method, and repeat samples produced at the same settings. |
| 5. Operating efficiency | Review stable running speed, stoppage frequency, changeover time, and the time needed for routine adjustments. | Compare machines under the same yarn, fabric, speed, and trial duration. A rated maximum speed alone does not show typical production output. | A production trial log showing running time, stoppage time, output, and causes of stops. |
| 6. Controls and fault monitoring | Check the control interface, speed adjustment, safety interlocks, and available yarn-break or fault-stop functions. | Operate the controls during a demonstration and confirm that alarms are clear and relevant to the intended production process. | A live demonstration, operator instructions, and a list of included monitoring and safety functions. |
| 7. Maintenance and total cost | Review access to wear parts, lubrication requirements, service support, installation needs, and expected utility consumption. | Compare the full cost of ownership, including tooling, spare parts, training, maintenance, and electricity—not purchase price alone. | A maintenance schedule, spare-parts list, training plan, installation requirements, and written service terms. |