Request Quote

Request a quote from Nidec Drive Technology America Corporation.

This quote form is intended for customers and partners in North America seeking information about Nidec Drive Technology America Corporation’s Precision Gearing Technologies. For inquiries related to the Nidec motor group division or from outside this region, please visit the global Nidec Group website to find the appropriate regional or product-specific contact.

Subscribe to Nidec Newsletter

Subscribe to our email newsletter to stay current with our precision gearing solutions, featured products, company updates, and industry news.

10 Tips for Buying Injection Molding Equipment

Choosing Injection Molding Equipment is a major decision for any production team. The right machine must suit the parts you make, the molds you run, and the output you actually need. A large press may seem like a safe choice, but unused capacity can raise costs without improving production. Fit matters more than impressive numbers.

Start with the details of your parts and process. Review material type, shot size, clamp force, mold dimensions, and expected cycle time. Ask suppliers to explain how their specifications match your requirements. A clear answer should connect machine capability to real production needs, not just list features. Bring sample part data and mold drawings to discussions whenever possible.

There is more to consider. Controls, energy consumption, service access, spare parts, and operator training all affect long-term ownership. Check what support is available after installation, and clarify which costs are included in the quote. Small details matter. A control panel that is difficult to use or a delayed replacement part can disrupt a shift. Even experienced buyers can overlook these practical issues when comparing machines. That is worth remembering.

The following 10 tips offer a structured way to assess options, compare suppliers, and avoid common purchasing mistakes. No checklist can replace a careful review of your own production conditions. Some decisions will still involve trade-offs. A lower purchase price, for example, may not mean lower operating costs. Use evidence, ask specific questions, and verify key claims before committing.

10 Tips for Buying Injection Molding Equipment

Define Production Requirements and Select the Right Machine Type

Define the part before comparing machines. Record resin, shot weight, projected area, cavity count, tolerance, annual volume, and target cycle time. These details determine clamp force, injection capacity, and whether automation is practical. PlasticsEurope’s Plastics – the Fast Facts 2024 reports 413.8 million tonnes of plastics produced worldwide in 2023. That figure covers plastics made by many processes, not injection molding alone, but it shows why “typical” production assumptions can mislead. Measure your own demand.

Tip: Match machine type to the job. Hydraulic machines often suit high clamp-force applications; all-electric machines can support precise, repeatable movement and lower idle energy use. Hybrid designs combine features of both. For large parts, compare platen spacing and tie-bar clearance, not just tonnage. For insert molding, check whether a vertical configuration improves loading access. Ask the mold maker to verify the required clamp force using the part’s projected area and resin-specific processing data.

Do not buy capacity you cannot use. A machine that is too large may run inefficiently, while an undersized unit can limit mold options. Check shot size against actual part-and-runner weight, then review the expected cycle with the intended material. A spreadsheet helps, but it can still miss changeover time, operator access, or future product variation. Leave room for those realities.

10 Tips for Buying Injection Molding Equipment - Define Production Requirements and Select the Right Machine Type

No. Requirement to Define What to Measure or Check How It Guides Machine Selection
1 Part and material Record the part’s dimensions, weight, wall thickness, projected area, resin grade, and any material additives. Part geometry and resin behavior influence the required injection pressure, shot capacity, clamp force, screw design, and temperature-control capability.
2 Annual production volume Estimate annual demand, shifts per day, operating days per year, and the required good-part output. High-volume, repeat production may justify a faster electric or hybrid machine and automation. Lower-volume or frequently changing work may favor a more flexible setup.
3 Cycle time and output Estimate the complete cycle, including injection, packing, cooling, mold opening, ejection, and handling. Confirm the target parts per hour. Check that the machine’s injection, clamp, and movement speeds can meet the production target. Validate the estimate with mold and process trials.
4 Clamp force Calculate the total projected area of all cavities and runners, then assess the resin, part geometry, and expected cavity pressure. Use a process-informed clamp-force estimate rather than a universal tonnage rule. Too little force can cause flash; excessive force can increase cost and energy use.
5 Shot size and injection capacity Compare the total shot weight, including runners where applicable, with the machine’s rated shot capacity for the selected resin. Choose a capacity that keeps the intended shot within the machine’s practical operating range. Confirm how the supplier rates shot size and whether the rating is resin-specific.
6 Injection pressure and rate Review the mold’s flow length, gate dimensions, wall thickness, resin viscosity, and expected fill time. Verify that the machine can provide the pressure and injection rate the application requires. A difficult-to-fill part may need more capability than its shot weight alone suggests.
7 Mold and platen fit Check tie-bar spacing, platen dimensions, mold width and height, minimum and maximum mold height, daylight, and opening stroke. Confirm the mold can be installed, opened far enough for part removal, and safely connected to the machine. Also check ejector stroke and ejector-force requirements.
8 Machine type and operating needs Compare hydraulic, all-electric, and hybrid designs against required accuracy, cycle speed, energy use, available utilities, and maintenance resources. Electric machines can suit applications needing precise, repeatable movements; hydraulic machines offer versatile force capability; hybrid designs combine features of both. Compare the actual specifications and application fit.
9 Automation and auxiliaries List the required robot, conveyor, dryer, hopper loader, temperature controller, granulator, safety interfaces, and communications. Check clearances, interface compatibility, electrical and air requirements, and whether the machine can support the planned automation now and later.
10 Quality, service, and lifecycle cost Define process-monitoring needs, required tolerances, expected uptime, maintenance coverage, spare-parts availability, and operating costs. Compare total cost of ownership—not purchase price alone—and confirm that the machine’s controls, service support, and documented performance meet production and quality requirements.

Note: Final machine sizing depends on the mold, resin, part design, process conditions, and production target. Confirm calculations and operating limits with qualified machine and mold specialists.

Compare Clamping Force, Shot Size, and Cycle-Time Specifications

Compare clamping force, shot size, and cycle time against the actual mold and resin—not just the machine’s headline numbers. PlasticsEurope’s Plastics—The Fast Facts 2023 reports 400.3 million tonnes of global plastics production in 2022. That scale makes repeatable output important, but it does not provide a one-size-fits-all machine specification.

Estimate clamp force from the mold’s projected area and the resin’s expected cavity pressure, then allow a practical safety margin. Too little force can cause flash; excessive force may stress the mold and machine. For shot size, compare the part, runner, and cushion volume with the machine’s usable barrel capacity. A shot near the machine’s maximum can leave little process headroom. Small differences matter. Check the shot.

Cycle-time figures need context. Ask whether the quoted time includes cooling, mold movement, and ejection, and request results from a comparable mold and material. Cooling often dominates the cycle, so a fast injection phase alone proves little. Verify the cooling layout and part-wall thickness before accepting a sales estimate. ISO 20430:2020 covers safety requirements for injection molding machines, but it does not set a universal cycle-time target. That distinction is easy to miss. A shop’s actual cycle may vary with mold condition, resin drying, and operator settings, so treat estimates as a starting point, not a promise.

Injection Molding Equipment: Key Specification Comparison

Compare representative clamping force, maximum shot mass, and example cycle time across four press sizes.

Illustrative values only. Shot capacity is shown as polystyrene-equivalent mass; actual capacity varies by material and machine. Cycle time depends on the part, mold, material, and process settings, so it is not a fixed press rating.

Assess Mold, Material, and Factory Compatibility

Before comparing machine prices, check whether the mold fits the press. Measure mold width, height, weight, and tie-bar clearance against the machine’s platen and opening dimensions. Confirm that the mold’s required clamp force is within the press range, using projected part area and the resin’s processing requirements. Small details matter. A mold may fit the platen but still exceed the machine’s available daylight or ejector stroke.

PlasticsEurope’s Plastics – the Fast Facts 2024 report estimates global plastics production at 413.8 million tonnes in 2023. That broad material mix makes resin compatibility a practical buying concern, not a minor specification. Check the resin supplier’s processing window, including melt temperature, drying needs, and expected flow behavior, against the machine’s controls and screw design. Also verify that factory power, cooling-water capacity, ventilation, and floor loading can support the equipment. A report’s global figure cannot predict your production mix. I would avoid assuming that a press proven with one resin will handle another equally well; validate the intended material and mold together with a trial or documented process review.

Evaluate Total Ownership Costs and Supplier Reliability

The purchase price is only one part of an injection molding machine’s cost. Estimate expenses over its expected working life, not just the first year. Include energy use per cycle, installation, freight, operator training, compatible tooling, and routine maintenance. Spare parts matter, too. A machine that needs a specialized component can sit idle while production waits.

Ask suppliers for written details on warranty coverage, service response times, technician availability, and parts inventory. Request references from facilities running similar materials and production volumes. It helps to see a sample run using your intended mold and resin, with cycle time and acceptable defect levels recorded. A polished demonstration is useful, but it may not reflect a demanding shift schedule.

Compare quotes line by line. One offer may exclude cooling connections or startup support. That matters. A spreadsheet still cannot predict every stoppage, so leave room for unexpected repairs and lost production. Supplier reliability is not just a promise; it shows in clear documentation, practical answers, and support that remains available after installation. A vague response about service can be easy to overlook when the machine is running perfectly.

Verify Safety, Installation, Training, and After-Sales Support

Before comparing clamp force or cycle time, verify how the machine will be made safe and ready to run. Ask for the safety devices included, such as interlocked guards, emergency stops, and clear lockout points. Request a demonstration of normal startup and shutdown procedures. Small details matter. A guard that is awkward to open may be bypassed under production pressure, so check access during a realistic operating scenario.

Installation needs more than a delivery date. Confirm floor loading, power supply, cooling water, compressed air, and clearance for maintenance. Ask who handles leveling, connection, commissioning, and acceptance testing, and get these responsibilities in writing. A site checklist can prevent costly surprises, though it may still miss a detail in an older factory. Review it with the people who know the facility.

Training should cover operators and maintenance staff, not just one shift. Ask for hands-on practice with mold changes, alarms, routine cleaning, and safe recovery after a stop. Ask for names. Clarify how quickly support responds, which hours are covered, and whether remote troubleshooting or spare parts are available. Keep service contacts and maintenance instructions near the machine. If support promises sound vague, request specific response times and escalation steps before placing the order.