| Cure system | Peroxide-cured VMQ | Commonly supplied as a compound for compression or transfer molding. Cure and post-cure requirements depend on the formulation. | General molded seals, gaskets, and cushioning parts. | Recommended cure schedule, post-cure guidance, hardness, tensile strength, and elongation. |
| Cure system | Platinum-cured VMQ | Addition-cure system; cure behavior and suitability for regulated or sensitive uses must be confirmed for the specific grade. | Selected medical, food-contact, and high-purity applications where grade-specific compliance is required. | Cure conditions, applicable regulatory declarations, extractables or migration data when relevant, and lot traceability. |
| Supply form | Millable silicone rubber (HCR) | High-consistency, workable rubber supplied in a solid form; typically processed by molding or extrusion with suitable equipment. | Molded components, profiles, tubing, and technical parts. | Compound form, processing method, storage guidance, cure package, and production lead time. |
| Supply form | Liquid silicone rubber (LSR) | Two-part, pumpable silicone system commonly processed by metered mixing and injection molding; it is a liquid processing form, not a hardness class. | Precision-molded seals, flexible components, and selected consumer or healthcare parts. | Mix ratio, viscosity, working and cure times, molding requirements, and grade-specific approvals. |
| Hardness | Soft, medium, or firm grade | VMQ compounds are available across a broad hardness range. Shore A values are commonly specified, but the available range varies by product and supplier. | Soft grades for flexible parts; firmer grades for parts requiring greater resistance to deformation. | Target Shore A hardness, test method, tolerance, and whether the result is measured on a finished or standard test specimen. |
| Functional property | Heat-resistant grade | Silicone elastomers are used in applications involving elevated temperatures, but continuous-use limits and aging performance are formulation-specific. | Seals and insulation components exposed to heat within the grade’s specified limits. | Operating-temperature guidance, heat-aging test results, and changes in hardness, tensile strength, or elongation after aging. |
| Functional property | Tear-resistant grade | Formulated to improve tear strength relative to a standard compound; performance should be compared using the same test method and specimen preparation. | Parts with thin sections, edges, or repeated flexing where tearing is a concern. | Tear-strength test method and result, tensile properties, hardness, and processing recommendations. |
| Functional property | Electrically insulating grade | Electrical performance depends on formulation, thickness, conditioning, and test conditions; suitability cannot be inferred from the VMQ designation alone. | Insulating components and protective covers where the specified electrical requirements are met. | Volume resistivity, dielectric strength, test conditions, and applicable product or industry requirements. |
| Application compliance | Food-contact or medical-use grade | Compliance is specific to the formulation, intended conditions, jurisdiction, and end use; a general silicone description is not proof of approval. | Components used in applications requiring documented material suitability. | Current declarations and supporting test documents for the exact grade and intended conditions of use. |