| 1 | ISO 7241 Series A | Push-to-connect mating halves, commonly retained by locking balls and a sliding sleeve. | Typically spring-loaded poppet valves in both halves; valves open when the couplers are connected. | General-purpose hydraulic circuits in mobile equipment, agriculture, and industrial machinery. | Confirm the series, size, pressure rating, seal material, and dimensional compatibility; appearance alone does not establish interchangeability. | ISO 7241-1, Series A |
| 2 | ISO 7241 Series B | Push-to-connect design with a locking sleeve and ball-lock retention on many configurations. | Commonly uses spring-loaded poppet shutoff valves. | General-purpose industrial and mobile hydraulic connections, including applications where Series B dimensions are specified. | Series A and Series B are different dimensional series; verify the required series rather than relying on nominal size alone. | ISO 7241-1, Series B |
| 3 | ISO 16028 Flat-Face | Push-to-connect coupling with flat mating faces and a sleeve or locking mechanism. | Flat-face valve elements close when disconnected, helping limit fluid loss and contamination entry. | Construction and mobile equipment, where clean connection and reduced spillage are important. | Check pressure, flow capacity, face cleanliness, and whether the specific design permits connection with residual pressure. Many designs require pressure relief before reconnection. | ISO 16028 |
| 4 | Agricultural Quick Coupler | Commonly a push-to-connect design used for tractor and implement circuits; exact retention details depend on the configuration. | Often uses poppet-style shutoff valves; valve and sleeve designs vary by product. | Tractor remote hydraulics and agricultural implements. | Check the specified agricultural interface, size, working pressure, and compatibility with the tractor’s existing coupler. Do not assume all agricultural couplers share the same dimensions. | ISO 5675 for applicable agricultural couplings |
| 5 | Screw-to-Connect Coupler | Mating halves are joined and secured by rotating a threaded sleeve or coupling nut. | Often uses poppet shutoff valves; valve details depend on the design. | Hydraulic systems needing a securely retained connection, including some higher-pressure or vibration-prone applications. | Verify thread form, pressure rating, tightening procedure, and whether the coupler is designed for connection under residual pressure. Never assume these features from the connection style alone. | ISO 14540 covers certain screw-to-connect hydraulic couplings |
| 6 | Push-to-Connect Ball-Lock Coupler | The plug is pushed into the socket; locking balls engage a groove and are held by a sleeve. | May use poppet valves or other shutoff arrangements, depending on the coupler series. | Frequently connected and disconnected hydraulic lines where a quick, tool-free connection is required. | “Push-to-connect” describes the mating action, not a universal size or standard. Confirm the exact profile, pressure rating, and interchangeability requirements. | Design-dependent; confirm the specified series or dimensional standard |
| 7 | Push-Pull Coupler | Designed so connection or disconnection can be carried out by pushing or pulling the hose or implement connection, subject to the product design. | Usually incorporates automatic shutoff valves in the mating halves. | Tractor and implement connections where operators benefit from straightforward coupling and uncoupling. | Operating method and permissible side load vary. Check the manufacturer’s instructions, mounting arrangement, pressure rating, and compatibility with the mating half. | Application- and design-dependent; not one universal dimensional series |
| 8 | Ball-Valve Coupler | Connection may use a threaded, lever-operated, or quick-coupling arrangement, depending on the assembly. | A rotating ball with a flow passage opens or blocks the hydraulic path. | Hydraulic isolation points and selected fluid-power connections where a positive manual shutoff is needed. | Check the flow direction, pressure and temperature limits, sealing materials, and whether the design is intended for frequent quick connection. Ball-valve design does not by itself define coupler interchangeability. | Design-dependent; verify the applicable component specification |
| 9 | Dry-Break / Non-Spill Coupler | Often uses a flat-face mating interface; connection and locking method vary by design. | Shutoff elements are designed to minimize fluid loss when the halves are disconnected. | Applications where leakage, fluid handling, or contamination control needs to be reduced. | “Non-spill” describes a performance aim, not a guarantee of zero leakage. Review the rated leakage performance and pressure-relief requirements for the selected model. | Flat-face designs may use ISO 16028 dimensions; confirm the specific specification |
| 10 | Diagnostic Test-Point Coupling | A small test connection accepts a compatible pressure-test probe or measuring adapter rather than serving as a main-flow line coupling. | Typically self-sealing when the probe is removed. | Pressure measurement, troubleshooting, and condition monitoring in hydraulic systems. | Match the test point to the intended probe, pressure range, and fluid. These fittings are for measurement access, not for connecting a full-flow hydraulic circuit. | ISO 15171-1 for applicable hydraulic test-point connections |